Nortel Networks N0060600 manual To use Camp-on, Call Park, To park a call

206 Chapter 24 Feature configuration: Answering calls

Centralized voice mail, Meridian: If your system is part of a private network that uses the Meridian call attendant as part of a centralized voice mail system, the attendant can use camp-on to camp a call on any telephone in any system on the network.

Setting the timer

The system camps a call for a specified length of time before it returns the call to the original answering telephone. Set the timer under Configuration > Telephony > Global Settings > Feature Settings.

To use Camp-on

1Press FEATURE 82.

2Dial the extension of the receiving telephone.

Call Park

You can park a call on the system that can be accessed from any telephone on the system.

Calls are parked on a three-digit park code. The first digit of the code is a system access code. The last two digits range from 01 to 25. (FEATURE 74)

You can also set a delay period for when the call returns to the telephone from which it was parked; under Configuration > Telephony > Global Settings > Feature Settings. You can also determine the order used to assign the codes (Park mode).

Setting up the call park access code

The park prefix must be unique from any other access code (Default: 1).

Configuration > Telephony > Dialing Plan > General (Access Codes subpanel)

Setting up park timeout

Determine how many minutes the system waits between parking a call and returning the call to the original answering telephone.

Configuration > Telephony > Global Settings > Feature Settings > Timers subpanel

Determining the order in which call park codes are assigned to calls

Configuration > Telephony > Global Settings > Feature Settings > Park mode

To park a call

1Enter FEATURE 74.

2The display shows a three-digit retrieval code (*X01-X24).

3Note the code, and inform other users about the parked call.

N0060600