|
| Chapter 27 Display prompts and messages 235 | |
|
| ||
Display prompt | Description of error or action | ||
|
|
| |
|
| Silent monitor: When you join a monitored call, you can choose to: | |
OTHERLEAVEEXIT | – move to another Hunt group member (OTHER) | ||
|
| – mute your telephone out of the current conversation (this does not | |
|
| disconnect silent monitoring) (JOIN) | |
|
| – exit the silent monitoring (EXIT) | |
Access denied | Programming is busy, or the feature you are trying to use is not compatible with the | ||
|
| configuration of the telephone or line. | |
|
| Silent monitor: You tried to start a monitoring session on a telephone that does not | |
|
| support the feature. | |
|
| ||
Already joined | Your telephone is connected to the telephone you are trying to call. Check your | ||
|
| active line buttons, and return to that call. | |
|
| Pickup group: You are connected to the telephone that made the call you are trying | |
|
| to answer. This display appears if you are on a call to a colleague, your colleague | |
|
| dials the number of a telephone in your pickup group, and you try to answer that call. | |
Already parked | Call park: The person you were talking to has parked your call. You cannot park the | ||
|
| same call. | |
|
| ||
Autodial full | Auto dial: The memory allocated to auto dial numbers in your system is full. | ||
|
| ||
Button erased | Auto dial: While programming external auto dial, you erase the button by pressing | ||
|
| HOLD or OK before entering any digits. | |
|
| ||
Call NNN? | You have received a Ring Again offer from a call to an internal telephone. Press the | ||
YES | NO | flashing internal line button or YES to call the number again. On 7000 and 7100 | |
digital phones, just lift the handset. Otherwise, press NO or wait 30 seconds for Ring | |||
|
| Again to expire. | |
Calling NNN | Wait for the telephone to be answered. If no one answers, press LATER to use the | ||
PRIORITY | LATER | Ring Again feature or Message feature, or press PRIORITY to make a priority call. | |
Priority Call: You initiate the Priority call transfer to this local. | |||
|
| ||
|
| ||
Call blocked | Priority call: You tried to place a priority call to another telephone in your system. The | ||
|
| person you called has blocked your call. | |
|
|
| |
Camped: NNN CALLBCK
Camp denied
Camp to:
CANCL
Cancel denied
Can't ring again
Cleared>LINENAM
NEXT
CLI COPY INCOMP
The person at extension NNN has not answered the camped call. The call has come back to you. Press the line button or CALLBCK to reconnect to the call. On 7000 and 7100 digital phones, lift the handset to reconnect to the call.
Message: You entered an invalid number when trying to cancel a message.
You cannot use Ring Again on your current call. You can use Ring Again while you have a busy signal on an internal call or line pool request, or while an internal call is ringing.
Message: You cleared an external message from your message waiting list. The message exists in your message center until you erase it there.
You attempted to allow CLI for an assigned line for more than 30 telephones.
