![](/images/new-backgrounds/1203528/20352895x1.webp)
48Chapter 6 DN records parameters
Table 10 Telephone line assignment fields (Sheet 3 of 3)
Attribute | Values | Description | |
|
|
| |
Add | To add a line to a telephone: | ||
| 1. | On the System DNs table (Line Access tab), choose the DN record where you want to | |
|
| add lines. |
|
| 2. | Under the Assigned Lines table in the bottom panel, click Add. | |
| 3. | Enter a line number in the dialog box. | |
| 4. | Click OK to save the line to the list. | |
|
|
| |
Delete | 1. | On the System DNs table (Line access tab), choose the DN record where you want to | |
|
| delete lines. |
|
| 2. | On the Assigned Lines table in the bottom panel, select a line you want to delete. | |
| 3. | Click Delete. |
|
| 4. | Click OK to confirm the selection. | |
|
|
|
|
Line Access - Line Pool Access tab
Use the Line Pool Access tab to add line pools to a telephone record.
Figure 10 Line Access - Line Pool Access tab
These shared pools of lines enables many users to use fewer lines for connections, where dedicated lines are not practical or not desirable. If all lines in the pool are taken, the user receives a busy signal.
Some trunks, such as PRI and VoIP, must be put into line pools. For outgoing calls, the line pools are assigned to the telephones that call out over these trunks.
All lines except PRI and BRI