Operation

Return to Section TOC

Return to Master TOC

B-5

7.20 AMP, 115 VOLT DUPLEX RECEPTACLES: Connection point for supplying 115 volt power to operate one or two electrical devices.

8.50 AMP, 230/115 VOLT RECEPTACLE: Connection point for supplying 230 volt power to operate one electrical device.

9.WELD OUTPUT TERMINAL (TO WORK) WITH FLANGE NUT: Provides the connection point for the work cable.

10.WELD OUTPUT TERMINAL (TO ELECTRODE HOLDER) WITH FLANGE NUT: Provides the connection point for the electrode holder.

11.GROUND STUD: Provides a connection point for connecting the machine case to earth ground for the safest grounding procedure.

12.14 PIN AMPHENOL: For attaching wire feeder control cables to the RANGER 10-LX. (Includes contactor closure circuit, remote control circuit, wire feeder 115/42 volt power source.)

13.6 PIN AMPHENOL: For attaching optional remote control equipment to the RANGER 10-LX. (Includes contactor closure circuit & remote con- trol circuit.)

14.VOLTMETER – Displays actual voltage at the out- put terminals when welding in CV-mode.

RANGER 10-LX

Lincoln Electric SVM120-A service manual Operation

Models: SVM120-A

OPERATION