Lucent Technologies 108596560 manual Activate Do Not Disturb Feature Button

GuestWorks and DEFINITY ECS Release 8	Issue 6
Hospitality Operations 555-230-723	December 1999
Hospitality Operations
Guest Operations	13

2.If you want to change the time your Do Not Disturb period ends, press the 2 button.

■You will now go through the original procedure for entering the time. Your new time will replace the old time.

3.If you want to cancel Do Not Disturb completely, press the 3 button.

■You will hear a message saying “Thank you. Your request has been canceled.” You can hang up.

Activate Do Not Disturb (Feature Button)

Press the Do Not Disturb button.

■The lamp next to the Do Not Disturb button lights. Do Not Disturb is now activated.

Deactivate Do Not Disturb (Feature Button)

When the Do Not Disturb lamp is on, press the Do Not Disturb button.

■The lamp next to the Do Not Disturb button goes off. Do Not Disturb is now deactivated.

Emergency Access to the Attendant

In an emergency situation, you can send the attendant an urgent call for help. This call does not automatically place a call to an emergency service agent; a separate call is required. The attendant will receive both audible and visible signals that indicate the emergency call. There are two ways to place an emergency call to the attendant:

■Pick up the handset of your telephone and enter the Emergency Access to Attendant feature access code _____. The switch then sends an emergency signal to the attendant.

■If you cannot press the code, take the handset off the telephone. After being off-hook for the administered time interval, the switch automatically sends an emergency signal to the attendant.

This feature has administrable parameters that are documented in DEFINITY

Enterprise Communications Server Administrator’s Guide .