NETGEAR XSM7224S-100NAS Switching Commands 3-80

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-80
v1.0, November 2010
show dot1x clients
This command displays 802.1x client information.This command also displays information about
the number of clients that are authenticated using Monitor mode and using 802.1X.
EAP Response/
Id Frames
Received
The number of EAP response/identity frames that have been received by this
authenticator.
EAP Response
Frames
Received
The number of valid EAP response frames (other than resp/id frames) that have been
received by this authenticator.
EAP Request/Id
Frames
Transmitted
The number of EAP request/identity frames that have been transmitted by this
authenticator.
EAP Request
Frames
Transmitted
The number of EAP request frames (other than request/identity frames) that have been
transmitted by this authenticator.
Invalid EAPOL
Frames
Received
The number of EAPOL frames that have been received by this authenticator in which the
frame type is not recognized.
EAP Length
Error Frames
Received
The number of EAPOL frames that have been received by this authenticator in which the
frame type is not recognized.
Format show dot1x clients {<unit/slot/port> | all}
Mode Privileged EXEC
Term Definition
Clients
Authenticated
using Monitor
Mode
Indicates the number of the Dot1x clients authenticated using Monitor mode.
Clients
Authenticated
using Dot1x
Indicates the number of Dot1x clients authenticated using 802.1x authentication process.
Logical
Interface The logical port number associated with a client.
Term Definition