ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-48
v1.0, November 2010
no ipv6 traffic-filter
This command removes an IPv6 ACL identified by <name> from the interface(s) in a given
direction.
show ipv6 access-lists
This command displays an IPv6 access list and all of the rules that are defined for the IPv6 ACL.
Use the [name] parameter to identify a specific IPv6 ACL to display.
Format ipv6 traffic-filter <name> [vlan <vlan-id>] <in | out>[sequence <1-
4294967295>]
Modes • Global Config
• Interface Config
Format no ipv6 traffic-filter <name> [vlan <vlan-id>] in [sequence <1-
4294967295>]
Modes • Global Config
• Interface Config
Format show ipv6 access-lists [name]
Mode Privileged EXEC
Term Definition
Rule Number The ordered rule number identifier defined within the IPv6 ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Match All Indicates whether this access list applies to every packet. Possible values are True or
False.
Protocol The protocol to filter for this rule.
Source IP
Address The source IP address for this rule.
Source L4 Port
Keyword The source port for this rule.
Destination IP
Address The destination IP address for this rule.
Destination L4
Port Keyword The destination port for this rule.