NETGEAR XSM7224S-100NAS - page 492

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-76
v1.0, November 2010
port
Use the port command in TACACS Configuration mode to specify a server port number. The
server <port-number> range is 0 - 65535.
priority
Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The <priority> parameter specifies the
priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
timeout
Use the timeout command in TACACS Configuration mode to specify the timeout value in
seconds. If no timeout value is specified, the global value is used. The <timeout> parameter has
a range of 1-30 and is the timeout value in seconds.
show tacacs
Use the show tacacs command to display the configuration and statistics of a TACACS+
server.
Default 49
Format port <port-number>
Mode TACACS Config
Default 0
Format priority <priority>
Mode TACACS Config
Format timeout <timeout>
Mode TACACS Config
Format show tacacs [<ip-address|hostname>]
Mode Privileged EXEC