NETGEAR XSM7224S-100NAS - page 139

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-98
v1.0, November 2010
no lacp actor admin key
Use this command to configure the default administrative value of the key.
lacp actor admin state individual
Use this command to set LACP actor admin state to individual.
no lacp actor admin state individual
Use this command to set the LACP actor admin state to aggregation.
Note: This command is only applicable to physical interfaces.
Format no lacp actor admin key
Mode Interface Config
Format lacp actor admin state individual
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp actor admin state individual
Mode Interface Config