ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-107
v1.0, November 2010
no port-channel static
This command sets the static mode on a particular port-channel (LAG) interface to the default
value. This command will be executed only for interfaces of type port-channel (LAG).
port lacpmode
This command enables Link Aggregation Control Protocol (LACP) on a port.
no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
port lacpmode enable all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format no port-channel static
Mode Interface Config
Default enabled
Format port lacpmode
Mode Interface Config
Format no port lacpmode
Mode Interface Config
Format port lacpmode enable all
Mode Global Config