NETGEAR XSM7224S-100NAS - page 358

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-34
v1.0, November 2010
no sntp broadcast client poll-interval
This command resets the poll interval for SNTP broadcast client back to the default value.
sntp client mode
This command enables Simple Network Time Protocol (SNTP) client mode and may set the mode
to either broadcast or unicast.
no sntp client mode
This command disables Simple Network Time Protocol (SNTP) client mode.
sntp client port
This command sets the SNTP client port id to a value from 1-65535.
no sntp client port
This command resets the SNTP client port back to its default value.
Format no sntp broadcast client poll-interval
Mode Global Config
Default disabled
Format sntp client mode [broadcast | unicast]
Mode Global Config
Format no sntp client mode
Mode Global Config
Default 123
Format sntp client port <portid>
Mode Global Config
Format no sntp client port
Mode Global Config