ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-57
v1.0, November 2010
no switchport private group
This command is used to remove the specified port from the given private group.
private-group name
This command is used to create a private group with name <private-group-name>. The name
string can be up to 24 bytes of non-blank characters. The total number of private groups is 192
such that the valid range for the ID is <1-192>.
The <private-group-id> field is optional. If not specified, a group id not used will be assigned
automatically.
The mode can be either “isolated” or “community”. When in “isolated” mode, the member port in
the group cannot forward its egress traffic to any other members in the same group. By default, the
mode is “community” mode that each member port can forward traffic to other members in the
same group, but not to members in other groups.
no private-group name
This command is used to remove the specified private group.
Format no switchport private-group [<privategroup-name>|<privategroup-id>]
Mode Interface Config
Format {<privategroup-name> mode [community|isolated]|<groupid>}
Mode Global Config
Format private-group name <privategroup-name>
Mode Global Config