NETGEAR XSM7224S-100NAS - page 529

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Captive Portal Commands 9-4
v1.0, November 2010
Example
(switch)#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
CP IP Address................. 1.2.3.4
show captive-portal status
Use this command to report the status of all captive portal instances in the system.
Term Definition
Administrative
Mode The administrative mode is enabled or disabled.
Operational Status The Operational status is enabled or disabled.
Disable Reason If the operational status is disabled. This field shows the reason why the operational is
disabled.
CP IP Address It is the captive portal server IP address.
Format show captive-portal status
Mode Privileged EXEC mode
Term Definition
Additional HTTP
Port The additional HTTP port for captive portal to monitor. Captive portal only monitors
port 80 by default.
Additional HTTP
Secure Port The additional HTTPs port for captive portal to monitor. Captive portal only monitors
port 443 by default.
Peer Switch Statistics Reporting Interval
Authentication
Timeout The timeout for the authentication page to be served again.
Supported Captive
Portals The maximum number of captive portal instances supported by switch. It supports up
to 10 instances.
Configured Captive
Portals The number of created captive portal instances.