ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-161
v1.0, November 2010
show port-security static
This command displays the statically locked MAC addresses for port.
show port-security violation
This command displays the source MAC address of the last packet discarded on a locked port.
LLDP (802.1AB) Commands
This section describes the command you use to configure Link Layer Discovery Protocol (LLDP),
which is defined in the IEEE 802.1AB specification. LLDP allows stations on an 802 LAN to
advertise major capabilities and physical descriptions. The advertisements allow a network
management system (NMS) to access and display this information.
lldp transmit
Use this command to enable the LLDP advertise capability.
Format show port-security static <unit/slot/port>
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of statically locked MAC.
Format show port-security violation <unit/slot/port>
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of discarded packet on locked port.
Default enabled
Format lldp transmit
Mode Interface Config