2-1
v1.0, November 2010
Chapter 2Stacking Commands
The Stacking Commands chapter includes the following sections:
•“Dedicated Port Stacking” on page 2-1
•“Front Panel Stacking Commands” on page 2-10
•“Non-Stop Forwarding Commands” on page 2-12
•“Stack Firmware Synchronization Commands” on page 2-14

Dedicated Port Stacking

This section describes the commands you use to configure dedicated port stacking.
stack
This command sets the mode to Stack Global Config.
Note: The commands in this chapter are in two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the
configuration setting.
The Primary Management Unit is the unit that controls the stack.