NETGEAR XSM7224S-100NAS show igmpsnooping mrouter vlan This command displays information about statically configured ports.

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-150
v1.0, November 2010
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group
on a particular interface, which is participating in the VLAN, before deleting the interface
from the entry.This value may be configured.
Maximum
Response Time The amount of time the switch waits after it sends a query on an interface, participating in
the VLAN, because it did not receive a report for a particular group on that interface. This
value may be configured.
Multicast
Router Expiry
Time
The amount of time to wait before removing an interface that is participating in the VLAN
from the list of interfaces with multicast routers attached. The interface is removed if a
query is not received. This value may be configured.
Format show igmpsnooping mrouter interface <unit/slot/port>
Mode Privileged EXEC
Term Definition
Interface The port on which multicast router information is being displayed.
Multicast
Router
Attached
Indicates whether multicast router is statically enabled on the interface.
VLAN ID The list of VLANs of which the interface is a member.
Format show igmpsnooping mrouter vlan <unit/slot/port>
Mode Privileged EXEC
Term Definition
Interface The port on which multicast router information is being displayed.
VLAN ID The list of VLANs of which the interface is a member.
Term Definition