ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Stacking Commands 2-10
v1.0, November 2010
If you do not supply a value for <switchindex>, the following output appears:
If you supply a value for <switchindex>, the following output appears:
Front Panel Stacking Commands
This section describes the commands you use to view and configure front panel stacking
information.
stack-port
This command sets front panel stacking per port to either stack or ethernet mode.
Term Definition
Switch Index (SID) The index into the database of supported switch types. This index is used when
preconfiguring a member to be added to the stack.
Model Identifier The model identifier for the supported switch type.
Management
Preference The management preference value of the switch type.
Code Version The code load target identifier of the switch type.
Term Definition
Switch Type The 32-bit numeric switch type for the supported switch.
Model Identifier The model identifier for the supported switch type.
Switch
Description The description for the supported switch type.
Default stack
Format stack-port <unit/slot/port> [{ethernet | stack}]
Mode Stack Global Config