ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-108
v1.0, November 2010
no port lacpmode enable all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
port lacptimeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type (actor or
partner) to either long or short timeout.
no port lacptimeout
This command sets the timeout back to its default value on a physical interface of a particular
device type (actor or partner).
port lacptimeout (Global Config)
This command sets the timeout for all interfaces of a particular device type (actor or partner) to
either long or short timeout.
Format no port lacpmode enable all
Mode Global Config
Default long
Format port lacptimeout {actor | partner} {long | short}
Mode Interface Config
Format no port lacptimeout {actor | partner}
Mode Interface Config
Default long
Format port lacptimeout {actor | partner} {long | short}
Mode Global Config