ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-22
v1.0, November 2010
conform-color
Use this command to enable color-aware traffic policing and define the conform-color class map.
Used in conjunction with the police command where the fields for the conform level are specified.
The <class-map-name> parameter is the name of an existing DiffServ class map.
class
This command creates an instance of a class definition within the specified policy for the purpose
of defining treatment of the traffic class through subsequent policy attribute statements. The
<classname> is the name of an existing DiffServ class.
Note: This command may only be used after specifying a police command for the policy-
class instance.
Format conform-color <class-map-name>
Mode Policy-Class-Map Config
Note: This command causes the specified policy to create a reference to the class
definition.
Note: The CLI mode is changed to Policy-Class-Map Config when this command is
successfully executed.
Format class <classname>
Mode Policy-Map Config