ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-90
v1.0, November 2010
IP Address Conflict Commands
ip address-conflict-detect run
This command triggers the switch to run active address conflict detection by sending gratuitous
ARP packets for IPv4 addresses on the switch.
show ip address-conflict
This command displays the status information corresponding to the last detected address conflict.
clear ip address-conflict-detect
This command clears the detected address conflict status information.
Format ip address-conflict-detect run
Mode Global Config
Term Definition
Address Conflict
Detection Status Identifies whether the switch has detected an address conflict on any IP address.
Last Conflicting
IP Address The IP Address that was last detected as conflicting on any interface.
Last Conflicting
MAC Address The MAC Address of the conflicting host that was last detected on any interface.
Time Since
Conflict
Detected
The time in days, hours, minutes and seconds since the last address conflict was
detected.
Format clear ip address-conflict-detect
Mode Privileged EXEC