ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-148
v1.0, November 2010
no set igmp mrouter interface
This command disables the status of the interface as a statically configured multicast router
interface.
ip igmpsnooping unknown-multicast
This command enables the filtering of unknown multicast packets to the VLAN. Packets with an
unknown multicast address in the destination field will be dropped. This command is mainly used
when IGMP snooping is enabled, to prevent flooding of unwanted multicast packets to every port.
no ip igmpsnooping unknown-multicast
This command disables the filtering of unknown multicast packets. Unknown multicast packets
will be flooded to all ports in the same VLAN.
show igmpsnooping
This command displays IGMP Snooping information. Configured information is displayed
whether or not IGMP Snooping is enabled.
Format no set igmp mrouter interface
Mode Interface Config
Format ip igmpsnooping unknown-multicast
Mode Global Config
Format no ip igmpsnooping unknown-multicast
Mode Global Config
Format show igmpsnooping [<unit/slot/port> | <vlan_id>]
Mode Privileged EXEC