ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-38
v1.0, November 2010
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging
is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number.
no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging
is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification
number.
vlan protocol group
This command adds protocol-based VLAN groups to the system. When it is created, the protocol
group will be assigned a unique number (1-128) that will be used to identify the group in
subsequent commands.
Format no vlan port pvid all
Mode Global Config
Format vlan port tagging all <1-4093>
Mode Global Config
Format no vlan port tagging all
Mode Global Config
Format vlan protocol group <1-128>
Mode Global Config