ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-32
v1.0, November 2010
The following information is repeated for interface and direction (only those interfaces configured
with an attached policy are shown):
show policy-map interface
This command displays policy-oriented statistics information for the specified interface and
direction. The <unit/slot/port> parameter specifies a valid interface for the system.
The following information is repeated for each class instance within this policy:
Term Definition
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.
Note: This command is only allowed while the DiffServ administrative mode is enabled.
Format show policy-map interface <unit/slot/port> [in]
Mode Privileged EXEC
Term Definition
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
Operational
Status The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.
Term Definition
Class Name The name of this class instance.
In Discarded
Packets A count of the packets discarded for this class instance for any reason due to DiffServ
treatment of the traffic class.