NETGEAR XSM7224S-100NAS Utility Commands 6-59

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-59
v1.0, November 2010
show hosts
Use this command to display the default domain name, a list of name server hosts, the static and
the cached list of host names and addresses <name> ranges from 1-255 characters. This command
displays both IPv4 and IPv6 entries. ..
Example: The following shows example CLI display output for the command.
<Switch> show hosts
Host name......................... Device
Default domain.................... gm.com
Default domain list............... yahoo.com, Stanford.edu, rediff.com
Domain Name lookup................ Enabled
Number of retries................. 5
Retry timeout period.............. 1500
Name servers (Preference order)... 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host Addresses
------------------------------ ------------------------------
accounting.gm.com 176.16.8.8
Host Total Elapsed Type Addresses
--------------- -------- ------ -------- --------------
Format show hosts [name]
Mode User EXEC
Field Description
Host Name Domain host name.
Default Domain Default domain name.
Default Domain
List Default domain list.
Domain Name
Lookup DNS client enabled/disabled.
Number of
Retries Number of time to retry sending Domain Name System (DNS) queries.
Retry Timeout
Period Amount of time to wait for a response to a DNS query.
Name Servers Configured name servers.