NETGEAR XSM7224S-100NAS - page 434

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-18
v1.0, November 2010
no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the default
value.
sshcon timeout
This command sets the SSH connection session timeout value, in minutes. A session is active as
long as the session has been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
show ip ssh
This command displays the ssh settings.
Format no sshcon maxsessions
Mode Privileged EXEC
Default 5
Format sshcon timeout <1-160>
Mode Privileged EXEC
Format no sshcon timeout
Mode Privileged EXEC
Format show ip ssh
Mode Privileged EXEC