ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-13
v1.0, November 2010
If you enter the interface <unit/slot/port> parameter, in addition to the MAC
Address and Status fields, the following field appears:
The following information displays if you enter the count parameter:
show process cpu
This command provides the percentage utilization of the CPU by different tasks.
The following shows example CLI display output.
(Switch) #show process cpu
Memory Utilization Report
status bytes
Term Definition
VLAN ID The VLAN on which the MAC address was learned.
Term Definition
Dynamic
Address count Number of MAC addresses in the forwarding database that were automatically learned.
Static Address
(User-defined)
count
Number of MAC addresses in the forwarding database that were manually entered by a
user.
Total MAC
Addresses in
use
Number of MAC addresses currently in the forwarding database.
Total MAC
Addresses
available
Number of MAC addresses the forwarding database can handle.
Note: It is not necessarily the traffic to the CPU, but different tasks that keep the CPU
busy.
Format show process cpu
Mode Privileged EXEC