NETGEAR XSM7224S-100NAS - page 429

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-13
v1.0, November 2010
no transport output telnet
Use this command to prevent new outbound Telnet connection from being established.
session-limit
This command specifies the maximum number of simultaneous outbound Telnet sessions. A value
of 0 indicates that no outbound Telnet session can be established.
no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to the default
value.
session-timeout
This command sets the Telnet session timeout value.The timeout value unit of time is minutes.
Format no transport output telnet
Mode Line Config
Default 5
Format session-limit <0-5>
Mode Line Config
Format no session-limit
Mode Line Config
Default 5
Format session-timeout <1-160>
Mode Line Config