NETGEAR XSM7224S-100NAS When the optional argument <vlanid> is not used, the command displays the following information., When you specify a value for <vlanid>, the following additional information appears.

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Switching Commands 3-155

v1.0, November 2010

When the optional argument <vlanid> is not used, the command displays the following information.When you specify a value for <vlanid>, the following additional information appears.When the optional argument detail is used, the command shows the global information and the information for all Querier-enabled VLANs.

Field Description

Admin Mode Indicates whether or not IGMP Snooping Querier is active on the switch.

Admin Version The version of IGMP that will be used while sending out the queries.

Querier

Address The IP Address which will be used in the IPv4 header while sending out IGMP queries. It

can be configured using the appropriate command.

Query Interval The amount of time in seconds that a Snooping Querier waits before sending out the

periodic general query.

Querier Timeout The amount of time to wait in the Non-Querier operational state before moving to a

Querier state.

Field Description

VLAN Admin

Mode Indicates whether iGMP Snooping Querier is active on the VLAN.

VLAN

Operational

State

Indicates whether IGMP Snooping Querier is in “Querier” or “Non-Querier” state. When

the switch is in Querier state, it will send out periodic general queries. When in Non-

Querier state, it will wait for moving to Querier state and does not send out any queries.

VLAN

Operational

Max Response

Time

Indicates the time to wait before removing a Leave from a host upon receiving a Leave

request. This value is calculated dynamically from the Queries received from the

network. If the Snooping Switch is in Querier state, then it is equal to the configured

value.

Querier Election

Participation Indicates whether the IGMP Snooping Querier participates in querier election if it

discovers the presence of a querier in the VLAN.

Querier VLAN

Address The IP address will be used in the IPv4 header while sending out IGMP queries on this

VLAN. It can be configured using the appropriate command.

Operational

Version The version of IPv4 will be used while sending out IGMP queries on this VLAN.

Last Querier

Address Indicates the IP address of the most recent Querier from which a Query was received.

Last Querier

Version Indicates the IGMP version of the most recent Querier from which a Query was received

on this VLAN.