NETGEAR XSM7224S-100NAS show ip source binding Use this command to display the IPSG bindings.

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

v1.0, November 2010

Example: The following shows example CLI display output for the command.

(switch) #show ip verify source

Interface Filter Type IP Address MAC Address Vlan

--------- ----------- --------------- ----------------- -----

0/1 ip-mac 210.1.1.3 00:02:B3:06:60:80 10

0/1 ip-mac 210.1.1.4 00:0F:FE:00:13:04 10

show ip source bindingUse this command to display the IPSG bindings.

Example: The following shows example CLI display output for the command.

(switch) #show ip source binding

MAC Address IP Address Type Vlan Interface

----------------- --------------- ------------- ----- -------------

MAC Address If MAC address filtering is not configured on the interface, the MAC Address field is

empty. If port security is disabled on the interface, then the MAC Address field displays

“permit-all.”

VLAN The VLAN for the binding rule.

Format show ip source binding [{static/dynamic}] [interface unit/slot/port]

[vlan id]

Mode • Privileged EXEC

• User EXEC

Term Definition

MAC Address The MAC address for the entry that is added.

IP Address The IP address of the entry that is added.

Type Entry type; statically configured from CLI or dynamically learned from DHCP Snooping.

VLAN VLAN for the entry.

Interface IP address of the interface in unit/slot/port format.

Term Definition