NETGEAR XSM7224S-100NAS no lldp med transmit-tlv Use this command to remove a TLV., show lldp med Use this command to display a summary of the current LLDP MED configuration.

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-176
v1.0, November 2010
no lldp med transmit-tlv
Use this command to remove a TLV.
show lldp med
Use this command to display a summary of the current LLDP MED configuration.
Example: The following shows example CLI display output for the command.
(switch) #show lldp med
LLDP MED Global Configuration
Fast Start Repeat Count: 3
Device Class: Network Connectivity
(switch) #
Format no lldp med transmit-tlv all [capabilities] [network-policy] [ex-pse]
[ex-pd] [location] [inventory]
Mode Global Config
Format show lldp med
Mode Privileged Exec
Term Definition
Fast Start
Repeat Count The number of LLDP PDUs that will be transmitted when the protocol is enabled.
Device Class The local device’s MED Classification. There are four different kinds of devices, three of
them represent the actual end points (classified as Class I Generic[IP Communication
Controller etc.], Class II Media Conference Bridge etc.], Class III Communication [IP
Telephone etc.]. Class IV Network Connectivity Device, which is typically a LAN Switch,
Router, IEEE 802.11 Wireless Access Point, etc.