NETGEAR XSM7224S-100NAS show logging traplogs This command displays SNMP trap events and statistics.

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-22
v1.0, November 2010
show logging hosts
This command displays all configured logging hosts. The <unit> is the switch identifier and has
a range of 1-8.
show logging traplogs
This command displays SNMP trap events and statistics.
Term Definition
Buffered (In-
Memory)
Logging
Shows whether the In-Memory log is enabled or disabled.
Buffered
Logging
Wrapping
Behavior
The behavior of the In Memory log when faced with a log full situation.
Buffered Log
Count The count of valid entries in the buffered log.
Format show logging hosts <unit>
Mode Privileged EXEC
Term Definition
Host Index (Used for deleting hosts.)
IP Address /
Hostname IP address or hostname of the logging host.
Severity Level The minimum severity to log to the specified address. The possible values are emergency
(0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7).
Port The server port number, which is the port on the local host from which syslog messages
are sent.
Host Status The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
Format show logging traplogs
Mode Privileged EXEC