NETGEAR XSM7224S-100NAS The number of configured named RADIUS server groups.

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-66
v1.0, November 2010
show radius
This command displays the values configured for the global parameters of the RADIUS client.
The following shows example CLI display output for the command.
(Switch)#show radius
Number of Configured Authentication Servers............. 32
Number of Configured Accounting Servers................. 32
Number of Named Authentication Server Groups............ 15
Number of Named Accounting Server Groups................ 3
Number of Retransmits................................... 4
Time Duration........................................... 10
RADIUS Accounting Mode.................................. Disable
RADIUS Attribute 4 Mode................................. Enable
RADIUS Attribute 4 Value ............................... 192.168.37.60
Format show radius
Mode Privileged EXEC
Term Definition
Number of Configured
Authentication Servers The number of RADIUS Authentication servers that have been configured.
Number of Configured
Accounting Servers The number of RADIUS Accounting servers that have been configured.
Number of Named
Authentication Server
Groups
The number of configured named RADIUS server groups.
Number of Named
Accounting Server
Groups
The number of configured named RADIUS server groups.
Number of Retransmits The configured value of the maximum number of times a request packet is
retransmitted.
Time Duration The configured timeout value, in seconds, for request re-transmissions.
RADIUS Accounting Mode A global parameter to indicate whether the accounting mode for all the servers
is enabled or not.
RADIUS Attribute 4 Mode A global parameter to indicate whether the NAS-IP-Address attribute has been
enabled to use in RADIUS requests.
RADIUS Attribute 4 Value A global parameter that specifies the IP address to be used in the NAS-IP-
Address attribute to be used in RADIUS requests.