19
Chapter 3
Hardware Troubleshooting
Use the tasks in this chapter to troubleshoot problems related to the BCM450 hardware components.
Navigation
•Troubleshooting the BCM450 hardware on page 19
•Power on self test on page 27
•Testing basic hardware functionality on page 28
•Monitoring the boot process on page 34
Troubleshooting the BCM450 hardware
Complete the following tasks, in the order shown below, to troubleshoot some of the common problems that you may encounter with the BCM450 hardware:
•Check the power source on page 19
•Check LED indicators on page 19
•Check the wiring connections on page 24
•Verify the keycodes on page 24
•Restart or shut down the system on page 25
Check the power source
Begin troubleshooting the hardware by checking the power source:
•check the connection between the power supply and the main unit
•check the connection from the power supply to the electrical outlet
Check LED indicators
After checking the power source, check the LED indicators. This section describes the operation of the BCM450 system LEDs:
•System status LEDs on page 20
•LAN port LEDs on page 21
•Media bay module LEDs (expansion units only) on page 21
•DTM LEDs on page 22
•BRIM LEDs on page 24
