26Chapter 3 Hardware Troubleshooting
To restart the system
Use this procedure to restart the system from the Element Manager.
1Select Administration > Utilities > Reset.
2Click the appropriate reset button.
Table 5 lists the Reset functions.
Table 5 Reset functions
Function | Description | Impact |
|
|
|
Reboot BCM450 System | Restarts the operating system of the | Temporarily stops all services on the |
| BCM450 system | system. Restarts all services. |
|
| This operation does not affect |
|
| configuration parameters or |
|
| programming. |
|
|
|
Warm Reset Telephony | Restarts telephony services running | Restarts all telephony services, |
Services | on the BCM450 system | including LAN CTE, Voicemail, and |
|
| IP telephony. |
|
| This operation does not affect |
|
| configuration parameters or |
|
| programming. |
|
|
|
Cold Reset Telephony | Resets telephony programming of | Affects all telephony services, |
Services | the BCM450 system to the factory | including LAN CTE, Voicemail, and |
| defaults for that software level | IP telephony. |
|
| Telephony services restart with all |
|
| telephony programming at default |
|
| values for the specified region, |
|
| template, and start DN, for the |
|
| current software release level. |
|
| A cold reset erases voice message |
|
| mailboxes and messages if the DN |
|
| length is not set to system defaults. |
|
| For information about setting the DN |
|
| length, refer to the BCM450 Device |
|
| Configuration Guide. |
|
|
|
Shutdown BCM System | Shuts down the BCM450. | Stops all services running on the |
|
| system. |
|
|
|
