Chapter 5 Advanced Troubleshooting 59
If the number of phones connected does not exceed the number of licenses, and does not exceed the maxium number of IP sets supported, use the procedure Troubleshooting example 3b on page 59 to verify the configuration of the IP phone.
Troubleshooting example 3a
1Select Configuration > Telephony Resources deregister the offline sets.
OR
2To connect more than 300 IP sets, configure unused Application DNs for these sets by selecting Configuration > Telephony Resources > Application Sets.
3Decrease the Application DNs and increase the IPSet DN count.
Troubleshooting example 3b
1Select Configuration > Resources > Telephony Resources and select the appropriate IP set from the list.
2On the IP Terminal Global Settings tab, ensure that the Enable Registration checkbox is selected.
3Verify that the Global password on the BCM450 is the same password that you are using the register the IP set (the default password is 2264). If this field is left blank, no password prompt occurs during phone registration.
