Chapter 6

Additional Operations 45

Using a Voice Command to Perform an Action

1From standby, press and hold .
You are prompted audibly and on the display to say the command.
2Say the command wit hin t w o seconds .
If you do not speak, you are informed that the command was not found.
If your command is not recognized, you are prompted to say it again. If
the command is not recognized the second time, you are informed that
the command was not found, and the display returns to standby.
When the command is recognized, the message Command Accepted
is displayed and announced audibly. After three seconds, the matching
command is shown on the display as the action is performed.

Reviewing and Deleting Voice Commands

1From standby, press (MENU) to enter the Main Menu.
2Scroll to Voice Commands and press (OK).
3Scroll to Review an d pr es s ( O K) .
4Select Phonebook or Phone Function and press (OK).
Any commands you have recorded are shown on the display.
5Scroll to the com m and you wan t to revi ew and press (PLAY).
The command is repeated until you press (S TO P ) or
(DELETE).
OR
Press (BACK) to return to the Review Commands menu.

Deleting All Voice Commands

1From standby, press (MENU) to enter the Main Menu.
2Scroll to Voice Commands and press (OK).
3Scroll to Delete All and press (OK).
4Press (YES) to delete all voice commands.
OR
Press (NO) to cancel the deletion and return to the Voice
Comma nds menu.

Tone Settings

The Tone Settings me nu l et s you custom ize your phone for use in spe ci al
surroun di ngs, set the vo lu m e and tone of the ph ones ring, and record a
voice ring. It also allows you to select a specific alert for the text messages
you re cei ve.

Ring Volume

See Setting Ring Volume on page 13.