Pioneer DVR-LX60D Options On Screen Display, Front Panel Display, Remote Control Recorder, Only

The Initial Setup menu		16
Setting	Options	Explanation
Options
On Screen Display	On •	The recorder displays operation displays (Stop, Play,
		etc.) on-screen.
	Off	Switches off the on-screen operation displays.
Front Panel Display	On •	The time is shown in the front panel display when the
		recorder is in standby.
	Off	The front panel display is switched off in standby.
Remote Control	Recorder 1–3	If you are using more than one recorder in the same
Mode	(default: Recorder 1)	room, set them to different IDs. This setting sets the
		recorder ID; to change the remote controller ID,
		press and hold RETURN/EXIT then press 1, 2 or 3 to
		set. The remote will only control a recorder with the
		same ID.
AV. Link	This Recorder	Signals received through the AV input when the
	Only •	recorder is in standby are not passed through to the
		AV output.
	Pass Through	Signals received when in standby are passed though
		to the output for connected devices. (Note that
		during EPG data download, the EPG data is not
		passed through.)

When set to Pass Through, make sure to set Power Save (page 127) to Off.

DivX VOD	Registration Code	Use to display the recorder’s DivX registration code.
		See DivX video compatibility on page 10 and DivX®
		VOD content on page 11.
Set Preview	Quick Preview •	When in the Disc Navigator, the thumbnail video
(HDD only)		plays short excerpts from throughout the selected
		title. (Note that edited titles that will play normally
		from the beginning.)
	Normal	The thumbnail video plays from the beginning of the
		title.
CI Information	Next Screen	This option displays a menu of CI card functions.
		Consult your service provider for more information
		on the functions available.
Software Update	Next Screen	The Software Update function can check for and
		download updated system software for the digital
		tuner. See Using Software Update (Digital tuner) on
		page 142.

139

En