16The Initial Setup menu
Setting | Options | Explanation |
AV2/L1 In | Video • | Sets the AV2 (INPUT 1/DECODER) SCART input to |
|
| standard composite video. |
|
|
|
| Sets the AV2 (INPUT 1/DECODER) SCART input to | |
|
| |
|
|
|
| RGB | Sets the AV2 (INPUT 1/DECODER) SCART input to |
|
| RGB. |
|
|
|
| Decoder | Use this setting if you connected a decoder to the |
|
| AV2 (INPUT 1/DECODER) SCART connector. For |
|
| scrambled channels, make sure that the channel |
|
| Decoder setting is set to On. (See Manual CH Setting |
|
| on page 130.) |
|
|
|
NTSC on PAL TV | On • | NTSC discs will play correctly on |
|
|
|
| Off | Use if your TV is already |
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating instructions that came with your TV. See also About NTSC on PAL TV on page 141 for related information.
Audio In
NICAM Select | NICAM • | Record the NICAM audio in a NICAM broadcast. |
|
|
|
| Regular Audio | Record the |
|
| (You can still switch the audio to record using the |
|
| AUDIO button before recording.) |
|
|
|
Analog Tuner Level | Normal • | Standard setting. |
|
|
|
| Compression | Use if the audio level from the |
|
| excessive, causing distortion. |
|
|
|
External Audio | Stereo • | Select if the audio from the currently selected |
|
| external input is standard stereo. |
|
|
|
| Bilingual | Select if each channel carries a separate soundtrack. |
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder whether the audio is stereo or bilingual. This has priority over the setting you make here.
Bilingual Recording A/L • | Record the left (A) channel of a bilingual source | |
|
| when recording to HDD with HDD Recording Format |
|
| set to Video Mode On, to |
|
| DVD+R/+RW or in LPCM mode, from an external |
|
| source. |
|
|
|
| B/R | As above, but for right (B) channel recording. |
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.
132
En
