Using the digital electronic programme guide | 06 |
2
Highlight the timer programme you want to change.
If you want to set a new timer programme, select ‘New Input’ and skip to step 4.
| ENTER |
|
3 | Press | then select ‘Modify’ |
from the command menu panel. Alternatively, press ENTER.
The Timer Programme Set screen appears from which you can edit the settings.
ENTER
4Enter the timer recording
settings.
Use the | buttons to select a field; use |
the | buttons to change the value. For |
more information on the options available at the Timer Programme Set screen, See Setting timer programmes on page 52.
ENTER
5After entering all the timer recording information, highlight ‘Store Programme’ and press ENTER.
The timer recording list screen is displayed again. The timer programme you just input appears in the list. The rightmost column shows various timer recording status messages:
•OK – Can be recorded.
•Time Over – Not enough space on the HDD (the recording won’t finish).
•Over 12h – Recording time of over 12 hours set (when recording to the HDD the recording will be split into two titles).
•Overlap – Two timer programmes partially or completely overlap. The one starting earlier will take priority.
•Until ... (eg., Until 13/8) – For a regular recording, the last programme that could be recorded is shown.
•Data Over – Can’t record because the disc management area of the disc is full.
•Cancel Once – A regular timer programme is set to skip.
•Can’t Rec – Not possible to record.
•Title Over – Can’t record because there is already the maximum number of titles on the disc (HDD: 999; DVD: 99).
•Recording – The programme is currently recording.
•Standby – The recorder is in timer recording standby.
•Valid Until ... (eg., Valid Until 13/8) (UK only) – When you have set to make a series recording of a programme that has no new scheduled broadcasts, the date displayed indicates the last day until which the scheduled programme settings remain valid. (If the programme is not broadcast for over 13 weeks, its settings are automatically deleted.)
•No Broadcast (UK only) – Displays when a programme for which you had the EPG Link set to On does not record because the date of the scheduled recording has already passed.
•nothing displayed – Another timer recording or copying is in progress.
6 
Press to exit the timer recording screen.
Note
•If you set a DVD timer recording but there is no recordable DVD disc loaded, or the disc loaded doesn’t have enough free space for the complete recording, Recovery is shown. In this case (unless you load a suitable disc before the recording actually starts), the recorder will use the HDD for recording. (The message Can’t Rec will appear if there are already 999 titles on the HDD or if there is not enough free space on the HDD for recording.)
55
En
