04Getting started
| ENTER |
2 | Highlight ‘Postal Code’. |
4If you are using an external receiver (such as a satellite receiver) with the supplied
| ENTER |
3 | Enter your postal |
code.
The system uses your postal code to identify which TV listings data is correct for the area in which you live, so it is important that you enter it correctly.
34
•See Connecting to a cable box or satellite receiver on page 17 for more on using the supplied
•Select External Receiver 1, 2 or 3, then press ENTER. (If you have just one external receiver, use External Receiver 1. You can add further receivers in 2 and 3 if you need to.)
After pressing ENTER:
•Select your reception method
(Terrestrial, Cable or Satellite).
•Select your provider (if applicable).
•Select the brand of your external receiver.
•Identify which input your external receiver is connected to.
After completing these steps the recorder will try and communicate with your external receiver and change the channel via the G- LINK cable. If the channel was successfully changed, select Yes to confirm.
If the channel did not change, select No. The GUIDE Plus+ system will try other codes assigned to your external receiver. If none of the codes changes the channel successfully, tune your external receiver to the host channel for your country (refer to step 5 below) and leave it on overnight. The
En
