Getting started | 04 |
•The clock will also be set automatically here if D.TV channels are found.
•If no new channels were found a message appears asking if you want to scan again. Check the aerial connection before selecting Yes. (If you select No, skip to step 8 below.)
ENTER
8Select the analog TV (A.TV) Auto Channel Setting (‘Auto Scan’ or ‘Download from TV’), or ‘Do not set’.
k SettingAutoChannel Setting
Line System
er Save | AutoEnglishScan |
P | Download from TV |
p Navigator Do not Set
•Select Do not set if you want to skip channel setup (because they have already been set up, for example).
•You can only use the Download from TV feature if this recorder is connected to your TV using a
ENTER
•Select your country.
k SettingCountry Selection |
|
t Line System |
|
er SaveCountry | UK |
P |
|
•Auto-tuning channels
The Auto Scan option automatically scans and sets the channel presets.
Tuning
32/99
Cancel
•Downloading channels from your TV Use the Download from TV option to download all the channels that your TV is tuned to.
Downloading | Pr 5 |
32/99
Cancel
ENTER
9Select ‘Auto’ for automatic time setting, or ‘Manual’ to set the clock manually.
If the clock was already set from a D.TV channel in step 6, this step is skipped.
kSettingClock Setting Line System
er Save | Auto |
PManual
•Auto clock setting
Some TV channels broadcast time signals together with the programme. This recorder can use these signals to set the clock automatically.
Set ‘Clock Set CH‘ to the channel preset number that broadcasts a time signal, then move the cursor down to ‘Start’ and press ENTER.
k SettingAutoClock Setting
Line System | / | ||
Date | |||
er Save |
|
|
|
P Time | : | ||
p Navigator |
|
| Pr 1 |
Clock Set CH |
|
| |
|
|
| Start |
The recorder takes a short while to set the time. After you see that it’s set, select Next to proceed.
k SettingAutoClock Setting
Line System
Date MON 01 / 01 / 2007 er Save
P Time | 11 : 20 |
p Navigator | Pr 1 |
Clock Set CH | |
| Start |
| Next |
If the time could not be set automatically, press RETURN/EXIT to go back to the previous screen and select Manual.
31
En
