Pioneer DVR-LX60D Connections Easy connections, Using other types of audio/ video output, Tip

02Connections

Easy connections

The setup described below is a basic setup that allows you to watch and record TV programmes, and play discs. Other types of connections are explained starting on the following page.

Important

• These connections use SCART cables (not supplied). If your TV (or VCR) does not have a SCART connection, and you want to use the supplied audio/video cable, see Using the supplied audio/video cable below.

• The AV1 (RGB)-TVAV connector can output ordinary (composite), S-video or RGB video, plus stereo analog audio. The AV2 (INPUT 1/DECODER) connector accepts ordinary, S-video and RGB video input, as well as stereo analog audio. See AV1 Out on page 131 and AV2/L1 In on page 132 for how to setup these options.

• Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

							1
				To antenna input			Antenna/cable TV
							wall outlet
From antenna output
				VCR			From SCART AV
To recorder's							connector
antenna input
							3
AV2 (INPUT 1/
DECODER)
ANTENNA R	AUDIO	L	VIDEO				DIGITAL
IN							AUDIO OUT
			S-VIDEO
			INPUT 3	AV 2 (INPUT 1/DECODER)			AC IN
						ANTENNA(DIGITAL) HDMI OUT COAXIAL
					G-LINK IN
						OUT	IN
OUT			OUTPUT
	Y PB		PR	AV 1 (RGB) – TV	CONTROL	5 V	30 mA
	COMPONENT VIDEO OUT

AV1 (RGB) - TV

	2
	To SCART AV
	connector
16	TV

1Connect your TV antenna to the recorder and TV.

See Connecting a TV antenna on page 15 for details.

•If you want to incorporate a VCR in your setup, connect it before the recorder (i.e., between the antenna wall outlet and the antenna input on the recorder).

2Use a SCART cable (not supplied) to connect the AV1 (RGB)-TV AV connector on this recorder to the SCART AV connector on your TV.

3Use another SCART cable to connect the AV2 (INPUT 1/DECODER) AV connector to a SCART AV connector on your VCR.

Tip

•This recorder has a ‘through’ function which allows you to record a TV programme from the built-in TV tuner in this recorder while watching a video playing on your VCR (To use this feature when the recorder is in standby, Power Save must be set to Off — see Power Save on page 127).

Using other types of audio/ video output

If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an S-video and component video output.

Using the supplied audio/video cable

To audio input

To video input

TV

AUDIOVIDEO

OUTPUT OUTPUT

ANTENNA R		AUDIO	L	VIDEO	1						DIGITAL
2	IN										AUDIO OUT
					S-VIDEO
					INPUT 3	AV 2 (INPUT 1/DECODER)					AC IN
								ANTENNA(DIGITAL)		HDMI OUT	COAXIAL
						G-LINK	IN
								OUT	IN
	OUT				OUTPUT
	Y	PB		PR		AV 1 (RGB) – TV	CONTROL	5 V	30 mA
	COMPONENT VIDEO OUT

En