
Using the digital electronic programme guide | 06 |
3 Enter the timer recording settings.
Use the | buttons to select a field; use |
the | buttons to change the value1. |
Timer Programme Set |
|
|
| ||
Manhattan Open Tennis |
|
|
|
| |
CH | Date | Start | Stop | Extend | |
D.TV003 | SUN 1/4 |
| 18:00 | 19:00 | Off |
|
|
|
|
| Store Programme |
Detailed Settings |
| Enter Details |
| ||
Record To |
| HDD |
|
| |
Recording Mode |
| XP |
| Set Detailed | |
VPS/PDC |
|
| |||
|
|
| |||
| Auto Replace Rec. |
| Set Title Name | ||
Genre |
| No Category | Cancel | ||
|
|
|
|
| |
|
|
|
|
| VPS/PDC 0/8 |
4If you want to change the recording mode, recording destination, etc., select ‘Set Detailed’.
In this area you can set:
Record to – Select HDD for hard disk recording or DVD for DVD recording2.
Recording Mode – Select from AUTO3, XP, SP, LP, EP, SLP, SEP (See Setting the picture quality/recording time on page 64). If Manual Recording is on, then you can also select the LPCM setting, XP+ or MN (press ENTER
then use the buttons to select the level).
•CH – Choose a channel (Pr 1 to Pr 99 for analog channels and available digital channels (excluding skip channels)), or one of the external inputs from which to record.
•Date – Choose a date up to one month in advance, or select a daily or weekly programme.
•Start – Set the recording start time.
•Stop – Set the recording end time (maximum length of a timer recording is 24 hours).
•Extend – Extend the end time of the timer recording (select Off, 10, 20 or 30 mins.)
VPS/PDC4 – Choose whether or not to use VPS/PDC when making timer recordings of analog programmes (see About timer recordings on page 68).
Auto Replace Rec. – Automatically erases the previous daily or weekly recording when the next one is recorded.
Genre – Select a record genre (for HDD recording only).
Note
1 You cannot change the CH, Date, Start, Stop, Extend and title name when you have EPG Link set to On (see page 54).
2 • For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 135) is set to On (and VPS/PDC is off), the recorder will adjust the recording quality to try and fit the recording on the disc. If the recording will not fit onto the disc even on MN1 recording quality (MN4 for DVD+R/+RW) then the Recovery Recording feature will automatically make the recording to the HDD instead.
•If there is very little free space left on the HDD, an Auto Replace Recording may not complete successfully.
•If the HDD is being used for playback or
3 This mode maximizes the recording quality to fit on to a single DVD disc. Can also be used when recording to HDD.
4 • If you set the timer recording to use VPS/PDC, you must switch the recorder into standby before the timer recording is due to start for it to work correctly. For
•Optimized Recording will not work if VPS/PDC is on.
•Up to eight timer recordings can be set with VPS/PDC.
•VPS/PDC cannot be set for recordings made from digital broadcasts or an external input, or when the recording mode is set to AUTO.
53
En