
Getting started
ENTER
14Select ‘Finish Setup’ to exit the Setup Navigator, or ‘Go Back’ if you want to start again.
kSetting
Line Systemetupis complete!
er Save |
|
| Finish Setup |
p Navigator | Go Back |
That completes basic setup using the Setup Navigator.
•If there are blank channels with no station, you can set these to skip using the manual channel setting. See Manual CH Setting on page 130.
For users receiving digital broadcast services
This unit can set its internal clock automatically from digital broadcasts. However, depending on the broadcaster, the clock information received may not be accurate.
Use the following procedure (while the recorder is not recording) to set the clock manually.
1 HOME MENU Press HOME MENU.
ENTER
2Select ’Initial Setup’ > ‘Basic’ > ‘Clock Setting’.
3Highlight the time setting.
4 | ENTER Press to display the manual clock |
setting screen. | |
5 | Set the correct time. |
Return to automatic clock setting
•To return to the automatic clock setting, follow the instructions for ‘Replace Channels’ (page 128).
04
Setting up the GUIDE Plus+® system
This section is only applicable if you chose to use the GUIDE Plus+ system as the EPG type in step 10 of the Setup Navigator above.
The GUIDE Plus+® system is a free, interactive
For the GUIDE Plus+ system to function correctly, it is important that you set the language and country correctly in the Setup Navigator, and that you have performed a scan for available channels, as these are all used by the GUIDE Plus+ system. If any of these things are not yet set, please run the Setup Navigator first (see Switching on and setting up on page 30).
TV listings information is received via ‘host channels’. In order to receive the correct TV listings information for your country or region you need to set up the GUIDE Plus+ system and ‘download’ the TV listings information. The initial download can take up to 24 hours, but once this is done, all future updates are automatic.
1 GUIDE Display the GUIDE Plus+ setup menu.
The language and country settings are |
|
already set to whatever you selected in the |
|
Setup Navigator. | 33 |
En