08Playback

PREV NEXT Press to skip to previous/next chapter/title. (During playback you can also use the front panel

CH +/– buttons.)

During playback, enter a title number then press ENTER to skip directly to that title.

Press CLEAR to clear a number

CLEAR CLEAR

entry and start again.

ENTER

(Commercial back/skip)

CM BACK

Turn the Smart Jog counter- CM SKIP clockwise for backward skip;

turn clockwise for forward skip. You can search up to two hours in either direction.

// While paused, press and hold to start slow-motion playback.

Press repeatedly to change the playback speed.

While paused, press to advance a single frame in either direc- tion. You can also execute frame-by-frame playback/back- ward scanning via the

Smart Jog.

Playing CDs and WMA/MP3 discs

The table below shows the basic playback

controls for audio CDs1, and WMA/MP3 files.

Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts

playback when paused.

Except WMA: Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV NEXT Press to skip to previous/next track (or folder for WMA/MP3

disc). (During playback you can also use the front panel CH +/– buttons.)

During playback, enter a track number then press ENTER to skip directly to that track.

Press CLEAR to clear a number

CLEAR CLEAR

entry and start again.

ENTER

Playing Video CD/Super VCDs

The table below shows the basic playback controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you can select

what to watch.2

Press to start playback.

Video CD only: If RESUME is dis- played on-screen, playback starts from the place last stopped.

STOP Press to stop playback.

Video CD only: You can resume playback from the same point by pressing PLAY. (Press

STOP again to cancel the resume function.)

76

En

Note

1If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected

using the AUDIO button (see Switching audio channels on page 83).

2When playing in PBC mode, some playback features, such as search, repeat and programme play are not available. You can play a PBC Video CD/Super VCD in non-PBC mode by starting playback using the Disc Navigator (see Using the Disc Navigator with playback-only discs on page 79).

Page 76
Image 76
Pioneer DVR-LX60D manual Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs, Entry and start again