Pioneer DVR-LX60D manual ‘----’ To use the recorder again Front panel display, Button is pressed

Additional information		17
Problem	Remedy
After briefly	• A backup battery inside the recorder keeps the clock and other
unplugging or after a	settings from being reset when there is no power to the recorder. After
power failure the front	unplugging or a power failure, the battery keeps all settings for a
panel display shows	period of several minutes. Reset the clock and other recorder settings
‘--:--’	to use the recorder again.
Front panel display	• The Child Lock is on; turn off in order to use the recorder (page 69).
shows ‘LOCKED’ when
a button is pressed

Can’t use One Touch • Make sure that there is a recordable DVD-R/-RW loaded with some

Copy (HDD to DVD) free space for recording and fewer than 99 titles already on the disc. Also make sure that for a DVD-R/-RW (Video mode) or a DVD+R, the disc isn’t finalized.

•Make sure there is a recordable DVD+R/+RW loaded with some free space for recording and fewer than 49 titles already on the disc.

•If you delete a title from a DVD+R/+RW disc, the number of remaining recordable titles may not decrease.

•Further recording is not possible on a finalized DVD+R. Check that there isn’t a disc menu on the disc you’re trying to use.

•If the title currently playing contains material that is copy-once protected, One Touch Copy will not work.

•If the currently playing HDD content was recorded in XP+ mode, the One Touch Copy feature can’t be used.

•One Touch Copy can’t be used for titles over eight hours long when copying to DVD+R/+RW (though you can use a DVD+R DL).

•One Touch Copy can’t be used for MN1 to MN6, SEP, SLP or EP titles when copying to DVD+R/+RW.

•One Touch Copy doesn’t work if the recorder is already recording to DVD.

Can’t use One Touch • Make sure that there is space available on the HDD and that there

Copy (DVD to HDD) are fewer than 999 titles on the HDD.

•One Touch Copy doesn’t work if the recorder is already recording to the HDD.

The device connected to the USB port is not recognized

•Check that the device is compatible with this recorder (page 22).

•Use a USB cable less than 5 m in length.

•Check that the USB cable is inserted fully.

•Check that the USB device is powered on.

•Try switching this recorder into standby mode and then back on.

•Try using the Restart USB Device option from the Initial Setup menu (page 140).

•If several USB devices (camera, USB memory, card reader, etc.) are connected at the same time, it’s possible that only the first device connected to this recorder will be recognized.

File names are not • Files names that do not conform to the ISO8859-1 standard may not

displayed properly. display correctly on this unit.

149

En