Polycom DOC2560C manual Preparations, Modify the Management Network parameters on the USB Key

2

First Time Installation and Configuration

Preparations

Hardware

Installation

and

Setup

First Entry

Power-up and

Configuration

First Time Installation and Configuration of the Polycom RMX 1500/2000/4000 consists of the following procedures:

1Preparations:

—Gather Network Equipment and Address Information - get the information needed for integrating the RMX into the local network.

—Unpack the RMX.

—Modify the Management Network parameters on the USB Key.

2Hardware Installation and Setup

—Mount the RMX in a rack.

—Connect the necessary cables.

3First Entry Power-up and Configuration

—Power up the RMX.

—Register the RMX.

—Connect to the RMX

—Configure the Default IP Network Service.

—Configure the ISDN/PSTN Network Service.

2-1