Polycom RMX 1500/2000/4000 Getting Started Guide
17Define the following parameters:
Table
Field | Description |
|
|
Network Service | Specify the service provider’s (carrier) name or |
Name | any other name you choose, using up to 20 |
| characters. The Network Service Name identifies |
| the ISDN/PSTN Service to the system. |
| Default name: ISDN/PSTN Service |
| Note: This field is displayed in all ISDN/PSTN |
| Network Properties tabs and can contain |
| character sets that use Unicode encoding. |
|
|
Span Type | Select the type of spans (ISDN/PSTN) lines, |
| supplied by the service provider, that are |
| connected to the RMX. Each span can be defined |
| as a separate Network Service, or all the spans |
| from the same carrier can be defined as part of |
| the same Network Service. |
| Select either: |
| • T1 (U.S. – 23 B channels + 1 D channel) |
| • E1 (Europe – 30 B channels + 1 D channel) |
| Default: T1 |
| Note: Only one Span Type (E1 or T1) is supported |
| on the RMX. If you define the first span as type E1 |
| all other spans that you may later define must also |
| be of type E1. |
|
|
Service Type | PRI is the only supported service type. It is |
| automatically selected. |
|
|
18Click Next.