Chapter
13Enter the required SIP Server information in the dialog box.
Table
Field | Description |
|
|
SIP Server | Select: |
| • Specify – to manually configure SIP servers. |
| • Off – if SIP servers are not present in the |
| network. |
|
|
SIP Server IP | Enter either the IP address of the preferred SIP |
Address | server or its host name (if a DNS server is used). |
|
|
Transport Type | Select the protocol that is used for signaling between |
| the MCU and the SIP Server or the endpoints |
| according to the protocol supported by the SIP |
| Server: |
|
|
| UDP – Select this option to use UDP for signaling. |
| TCP – Select this option to use TCP for signaling. |
| TLS – The Signaling Host listens on secured port |
| 5061 only and all outgoing connections are |
| established on secured connections. Calls from SIP |
| clients or servers to non secured ports are rejected. |
|
|