Polycom RMX 1500/2000/4000 Getting Started Guide
Unpacking the RMX
Unpacking the RMX 1500
To unpack and lift the RMX 1500:
1When you receive the RMX 1500 packing case, inspect the equipment for damage and verify that the components match the packing slip.
2Open the top cover of the packing case.
Two boxes are placed on the top Stratocell®, labelled:
—Installation Accessories. This kit contains the power cables and a
—Rack Installation Accessories. This kit contains the accessories for the 19”/23” racks as follows:
Write down the RMX’s serial number that is on a sticker on the back of the unit.
It will be needed for product registration later in the process.
Table
Item ID | Description | Quantity |
|
|
|
Chassis runner (60cm in length) for | 2 | |
| rack installation on the RMX 1500. |
|
| 19”/23” racks both require that these |
|
| runners be installed on the rack. |
|
|
|
|
Unpacking the RMX 2000
To unpack and lift the RMX 2000:
1When you receive the RMX 2000 packing case, inspect the equipment for damage and verify that the components match the packing slip.
2Open the top cover of the RMX 2000 packing case and make sure that the Installation Accessories kit contains the power cables and a USB Key.
3Remove the top cover, lift the RMX 2000 from the package and place it on a flat surface.
Write down the RMX’s serial number that is on a sticker on the back of the unit.
It will be needed for product registration later in the process.
